Power Generation Segments
View our segments below
  • Combined Cycle Plants

    Maximize your equipment reliability and power output while reducing outage times and operational costs. Without effective filtration, cleanliness cannot be controlled and steam/gas systems are unable to operate at peak efficiencies due to particulate contamination issues causing decreased combustion...

    Learn More »
  • Gas Turbines

    Gas turbine systems operate at high heat with high throughput. Protection of precision turbines and combustion chambers both from contaminated fuel and feed air is essential to prevent premature breakdown. Additionally lubrication systems will need to remain pure from solid particle contamination and water saturation. Pall’s...

    Learn More »
  • Nuclear Plants

    Pall set the world standard in nuclear safety, control, radioactive waste treatment and fuel pool clean-up. Today, the cleanest plants use Pall nuclear grade filters to reduce the out of core radiation levels and reduce overall personnel exposure, shorten outages and increase operating efficiency.

    Learn More »
Power Generation Segments
View our segments below
  • Renewables

    From the filtration of hydroelectric turbine control and lubrication fluids, to the protection of windmill gearboxes or the purification of biomass gases, the renewable power industry presents tremendous challenges. Pall employs state-of-the-art technology to solving these challenges to directly impact improved operation uptime, reduced maintenance frequency, extended life of capital equipment, and overall business profitability.

    Learn More »
  • Steam Plants

    Pall advanced separation science and high quality manufacturing are applied on all fluids throughout the steam power plant to ensure cleaner, safer, more reliable power with higher profitability.

    Learn More »
Power Generation Segments

HLP50 Oil Purifier

HLP50 Oil Purifier

Leveraging more than 30 years of design and field experience, Pall delivers the third in its family of HLP series fluid conditioning purifiers—the HLP50 Oil Purifier.

Combined Cycle Plants

Pall is a worldwide leader in fluid purification technologies for the international power generation market. Pall can solve your purification challenges in any size of application, from small flows and simple installations to large flows and complex systems, from the supply of filter elements to fully-integrated turnkey systems. 

 

Maximize your equipment reliability and power output while reducing outage times and operational costs. Without effective filtration solutions, fluid cleanliness cannot be controlled and steam/gas systems are unable to operate at peak efficiencies. Combined cycle power plant customers around the world rely on Pall products to purify water, oils, and gases in every stage of the power cycle.

Our most popular products include:

Hydraulic and Lubrication Oil Filters

Varnish Removal Systems

Oil Purifiers

Liquid / Liquid Coalescers

Fluid Cleanliness Monitors

Water Sensors

 

For more information on Pall’s contamination solutions for combined cycle power plants, click here to see purchase information or to talk to a Pall expert.

Pall is a worldwide leader in fluid purification technologies for the international power generation market. Pall can solve your purification challenges in any size of application, from small flows and simple installations to large flows and complex systems, from the supply of filter elements to fully-integrated turnkey systems. 

 

Maximize your equipment reliability and power output while reducing outage times and operational costs. Without effective filtration solutions, fluid cleanliness cannot be controlled and steam/gas systems are unable to operate at peak efficiencies. Combined cycle power plant customers around the world rely on Pall products to purify water, oils, and gases in every stage of the power cycle.

Our most popular products include:

Hydraulic and Lubrication Oil Filters

Varnish Removal Systems

Oil Purifiers

Liquid / Liquid Coalescers

Fluid Cleanliness Monitors

Water Sensors

 

For more information on Pall’s contamination solutions for combined cycle power plants, click here to see purchase information or to talk to a Pall expert.

Ultipleat® High Flow Technology

Ultipleat® High Flow Technology

Ultipleat High Flow technology controls metal and silica solid contamination in condensate water to reduce or eliminate boiler tube failures, and drastically shorten chemical holds during start-up.

Rigimesh® Filter Elements

Rigimesh® Filter Elements

Rigimesh® porous metal filter elements are extremely permeable and are constructed of high dirt capacity stainless steel (type 304 or 316L) woven wire mesh. Rigimesh media outperform other meshes because they are sintered woven wire meshes with higher void space.

Nuclear Plants

We can analyze the specific requirements of their clients and recommend optimal solutions for filtration and separation technologies to improve the efficiency of power plant operations and waste management techniques. Their diverse product portfolio provides technologies for the optimized decontamination of various fluids, as well as the minimization of associated radioactive exposure. These solutions are specifically tailored for processes necessary to all stages of the nuclear power plant life cycle, from start-up to decommission.

In the sophisticated nuclear power plants of today, efficient monitoring and decontamination of radioactive material requires tailored solutions for every unique system. We provide the necessary expertise to inspect and diagnose these systems, and as well as recommendations for streamlining the efficiency of these procedures for its clients.  Our Total Fluid Management (TFM) approach allows them to integrate tailored filtration and separation equipment and services to its clients, yielding low-cost, highly efficient solutions for nuclear power plants. 

Contact the Pall filtration experts to learn more about advanced nuclear power plant filtration systems today! 

We can analyze the specific requirements of their clients and recommend optimal solutions for filtration and separation technologies to improve the efficiency of power plant operations and waste management techniques. Their diverse product portfolio provides technologies for the optimized decontamination of various fluids, as well as the minimization of associated radioactive exposure. These solutions are specifically tailored for processes necessary to all stages of the nuclear power plant life cycle, from start-up to decommission.

In the sophisticated nuclear power plants of today, efficient monitoring and decontamination of radioactive material requires tailored solutions for every unique system. We provide the necessary expertise to inspect and diagnose these systems, and as well as recommendations for streamlining the efficiency of these procedures for its clients.  Our Total Fluid Management (TFM) approach allows them to integrate tailored filtration and separation equipment and services to its clients, yielding low-cost, highly efficient solutions for nuclear power plants. 

Contact the Pall filtration experts to learn more about advanced nuclear power plant filtration systems today! 

Sentry System for Varnish Removal

Sentry System for Varnish Removal

Prevent acid corrosion and varnish from oil-wetted surfaces inside a turbine lube system, to protect bearings and servo valves.

Where power meets precision

We offer a complete range of contamination and purity control solutions for the power generation market – fluid, gas and air.

Pall offers a comprehensive range of purification and contamination control solutions for water, oil, and gas applications in the Power Generation market, helping to improve fluid quality, ensure reliability, maximize output and increase profitability of plant equipment.

 

Pall’s filtration and separation solutions are designed to provide the highest level of asset protection across the wide spectrum of Power Generation industry demands. Pall has a proven history of providing premium, technologically advanced filtration and purification systems providing the reliability and performance utilities need to maximize output and get the most from their investment. From protection of gas turbines to the removal and containment of radioactive particles from fuel pools, Pall have a solution.

 

The Power Generation industry harnesses energy from multiple sources including fossil fuels (coal and gas), nuclear power, biomass, waste heat and renewable natural resources. It is also under intense environmental scrutiny and regulation.

 

All power generating systems operate rotating parts working under arduous and continuous use. Their operation is critical and repair or replacement of these precision parts is costly. Power plants strive to maximize their investment while keeping maintenance and downtime costs low. 

 

Pall’s filtration solutions protect valuable systems from catastrophic failures while keeping performance at a maximum. Pall offers solutions to purify lubricants, hydraulic systems, fuels, coolants, steam feeds, and gases. These cleanliness control systems ensure maximum protection of moving parts, protect system damage from environmental contamination, increase the operational life of equipment, and save power utilities from costly breakdowns

 

Solid, liquid and dissolved contaminants in fluids and gases will cause operating and maintenance problems on Power production assets such as boilers, turbines and transformers.  Left unchecked these contaminants increase O&M costs, decrease thermal efficiency and output and threaten environmental compliance

 

For more information on Pall’s power generation solutions click here or speak to a Pall customer service representative.